-40%
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue
MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue

MH Build Series PLA Filament - 2.85mm (1kg) - Black, White, Gray, Green, Blue

$ 10.56

  • Brand: Matterhackers
  • Filament Diameter: 2.85mm
  • Material: PLA
  • Type: Filament

Description

MH Build Series PLA Filament Technical Specifications Printer Settings: Extruder Temperature: 205±15°C Bed Temperature: Not needed, but 40±15 °C if your printer has heated bed Spool/Filament Dimensions: 200mm Total Diameter (approximately) 50mm Inner Hole Diameter (approximately) 65mm Height (approximately) 1 kg spool True Diameter: 2.85mm Dimensional Accuracy: ±0.03mm Density: 1.25 g/cm³ Volume: 0.80 L Length: 332.60 m