Description

[3DMakerWorld] NinjaFlex TPU 3D Printing Filament, 2.85mm, .75kg [3DMakerWorld] NinjaFlex TPU 3D Printing Filament, 2.85mm, .75kg Key Features Shore Hardness = 85A Truly flexible (no fill or layer manipulation required to achieve performance) Polyurethane composition allows for excellent vibration reduction 660% elongation allows for repeated movement and impact without wear or cracking Patented low friction exterior allows for smooth feeding NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and orality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. It's abrasion resistance is 20% better than ABS and 68% better than PLA! NinjaFlex's is chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon and adheres to all standard build platforms without glue or tape. Suggested applications include Seals, Gaskets, Plugs, Leveling Feet, Protective Applications. PRINTING GUIDELINES: Extruder Temperature: 225degC - 235degC Platform Temperature: Room temperature - 40degC Glue or blue painters tape is suggested if not using a heated bed. Top and bottom layer print speed: 10-20 mm/ sec (600-1200 mm/ min) Infill print speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Item Specifics Filament Diameter: 2.85mm Weight: .75kg